Ms. SUCHITHRA M. S.

SUCHITHRA M. S.
Lab Assistant
Room No.: E 11, D 07 Extn: 156
[email protected]
Mob No: 9446595620
Qualifications
Diploma -Electrical and Electronics Engineering
Experience: 4 Years

Mr. VISHNU CHANDRAN C. L

Lab instructor
Room No.: E11, Extn: 156
Email: [email protected]
Mob: 9947854172
Qualifications
Diploma – Electrical and Electronics Engineering
B.Tech – Doing
Conferences:
Poster presentation in engineering sciences section of Indian Science Congress 2019 “Automatic feeder control system With Safe Operation Technique”, 106th Indian Science Congress, Lovely Professional University, Punjab.
Experience:
Industry: 5 year
Training Course Attended
VSSC small package testing (VSSC Thumba)

Dr. Nisha G. K.

Room No.             : B 09        Extn:134

Area of interest:
  • Electrical Machines
  • Power Electronics
  • Industrial Drives

R & D             :

A comparison on the performance of BLDC motor drive with DBR, Luo and BL-Luo as Converters (In House On-going)

Amount Sanctioned: Rs. 1,00,000/-

Design and Implementation of Control Strategy for Load Sharing and Circulating Current Minimization in Grid Application(In House On-going)

Amount Sanctioned: Rs. 73,000/-

Publications:

1] G K Nisha, S. Ushakumari and Z. V. Lakaparampil “Online Harmonic Elimination of SVPWM for Three Phase Inverter and a Systematic Method for Practical Implementation”, IAENG International Journal of Computer Science, vol.39, no.2, pp.220-230, May 2012.

2] G K Nisha, Z. V. Lakaparampil and S. Ushakumari, “FFT Analysis for Field Oriented Control of  SPWM and SVPWM Inverter fed Induction Machine With and Without Sensor”, International journal of Advanced Electrical Engineering,vol.2, no.4, pp. 151-160, June 2013.

3] G K Nisha, Z. V. Lakaparampil and S. Ushakumari, “Performance Study of Field Oriented Controlled Induction Machine in Field Weakening using SPWM and SVM fed Inverters”, International Review of Modelling and Simulations, vol.6, no. 3, pp.741-752, June 2013.

4] G K Nisha, S. Ushakumari  and Z. V. Lakaparampil “ Method to Eliminate Harmonics in PWM:          A Study for Single Phase and Three Phase”, in the proceedings of International conference on Emerging Technology,                               Trends on Advanced Engineering Research, Kollam, India, pp. 598-604, 20-21 February 2012.

5] G K Nisha, S. Ushakumari and Z. V. Lakaparampil “Harmonic   Elimination of Space Vector Modulated Three Phase Inverter”, Lecture Notes in Engineering and Computer Science: in the Proceedings of the International Multi-conference of Engineers and Computer Scientists 2012, (IMECS 2012), Hong  Kong, pp.1109-1115, 14-16 March 2012.

6] G K Nisha, S. Ushakumari and Z. V. Lakaparampil “CFT Based Optimal PWM Strategy for Three Phase Inverter”, in the proceedings of IEEE International conference on Power, Control and Embedded Systems (ICPCES’12), Allahabad,India, pp. 1-6, 17-19 December 2012.

7] G K Nisha, Z. V. Lakaparampil and S. Ushakumari, “Sensorless Vector Control of SVPWM Inverter fed Induction Machine using Sliding Mode”, in the proceedings of IEEE International conference on Green Technology (ICGT’12), Thiruvananthapuram, India, pp. 29-36, 18-20 December 2012.

8] G K  Nisha, Z. V. Lakaparampil and S. Ushakumari, “FFT Analysis for Field Oriented Control of  SPWM and SVPWM Inverter fed Induction Machine With and Without Sensor”, in the proceedings of International conference on Advance Engineering Technology(ICAET’13), Mysore, India,  pp. 34-43, 27 January 2013.

9] G K Nisha, Z. V. Lakaparampil and S. Ushakumari, “Sensorless Field Oriented Control of SVM inverter fed Induction Machine in Field Weakening Region using Sliding Mode Observer”, in the proceedings of 7th World Congress on Engineering (WCE’2013), Imperial College, London, U.K., pp. 1174-1181, 3-5 July 2013.

10] G K Nisha, Mr. Z V Lakaparampil and Ms. S Ushakumari published a paper entitled “Four quadrant operation of Field weakened FOC Induction motor drive using Sliding Mode Observer”, Transactions on Engineering Technologies: Special volume of world Congress on Engineering, Springer Publications 2014.

11] G K Nisha, Mr. Z V Lakaparampil and Ms. S Ushakumari published a paper entitled “Effect of Leakage Inductance in Torque capability of Field Oriented Controlled Induction Machine in field weakening region” in the proceedings of International Conference on Advances in Engineering and Technology, Singapore, March 2014.

12] Dr. Nisha G K and Ms. Stella Kurien published research paper titled “Open Loop Control of Switched Reluctance Motor Using Theta Position Sensing”, International Journal of Innovative Science, Engineering and Technology, ISSN 2348-7968, Vol. 2, Issue 3, March 2015.

13] Dr. Nisha G K and Ms. Stella Kurien published research paper titled “Open Loop Operation of Switched Reluctance Motor With R Dump Converter”, International Journal of Electrical and Electronics Engineering Research, ISSN 2348-7968, Vol. 5, Issue 3, pp. 51-60, June 2015.

14] Dr. Nisha G K  and Ms. Stella Kurien published research paper titled “Closed loop operation of switched reluctance motor with Sliding Mode Current Controller”, International Journal of Applied Engineering Research, ISSN 2348-7968, Vol. 10, Issue 3, pp. 43407–43411, July 2015.

15] Stella Kurian, Dr. Nisha G K, “Closed Loop Operation of Switched Reluctance Motor with Hysteresis Controller”, International Journal of Applied Engineering Research, Vol. 10, Nov. 17, pp 37645-37650, September 2015.

16] Stella Kurian, Dr. Nisha G K , “Torque Ripple Minimization of SRM using Torque Sharing Function and Hysteresis Current Controller”, in the proceedings of 2015 International Conference on Control, Communication and Computing India (ICCC) at College of Engineering, Trivandrum on 19th to 21st November 2015.

17] Parvathi M.S, Dr. Nisha G K, “Modeling of Interior Permanent Magnet Synchronous Motor using Transient Simulation Techniques”, IJISET- International Journal of Innovative Science, Engineering & Technology, Vol. 3 Issue 7, ISSN (Online) 2348 – 7968, July 2016.

18] Parvathi M.S, Dr. Nisha G K, “Comparison on the Average Model of a Three Phase Inverter with its Modified Nodal Analysis Method”, International Journal of Current Engineering and Scientific Research (IJCESR), ISSN (Print): 2393-8374, (Online): 2394-0697, Volume-3, Issue-7,  DoI:10.21276,  July 2016.

19] Parvathi M.S, Dr. Nisha G K, “State of Art of PMSM Speed Control Using DTC and FOC Techniques”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 5, Issue 6, June 2016.

 

20] Akhila M, Dr. Nisha G K, “Total Harmonic Distortion Analysis of Diode Clamped Multilevel Inverter with resistive and Inductive Load”, International Journal for Scientific Research and developement, vol. 4, Issue 04, ISSN (online): 2321-0613, June 2016.

21] Parvathi M.S, Dr. Nisha G K, “Various Modeling methods for the analysis of three phase diode bridge rectifier and three phase inverter”, International Journal for scientific research and Engineering studies,  vol. 3, no. 7, pp. 21-28 , July 2016.

22] Akhila M, Lekshmi, Dr. Nisha G K, “Analysis and comparison of flying capacitor and modulator multilevel converter using SPWM”, International Journal of innovative Research and Advanced studies (IJIRAS),  vol. 3, no. 8 ,pp. 352-357 , July 2016.

23] Priji P.J, Dr. Nisha G K, Mr. Rejish Babu, “State of the art of three phase  to three phase matrix converter for motor drive”, International Journal for scientific research and development,  vol. 4, no. 4, pp. 677-68,August 2016.

24] Parvathi M.S, Dr. Nisha G K, “Implementation of a Three Phase Inverter with a Front End Diode Rectifier using Average Model,”  International Journal of Advanced Engineering, Management and Science (IJAEMS), vol. 2, issue 8, August 2016.

25] Akhila .M, Dr. Nisha G K , Ms. Manju Ann Mathews, “Comparative Analysis of Flying Capacitor and Diode Clamped Multilevel Inverters Using SPWM”, International Journal of innovative science Engineering Technology, vol. 3, no. 8, pp. 387-393, August 2016.

26] Dr. Nisha G K, Z. V. Lakaparampil and S. Ushakumari, “Torque Capability Improvement of Sensorless FOC Induction Machine in Field Weakening Region for Propulsion Purposes,” Journal of Electrical and Information Engineering: Elsievier, November 2016.

27] Dr. Nisha G K , Z. V. Lakaparampil and S. Ushakumari, “Effect of Power factor on Torque Capability of FOC Induction Machine in Field Weakening Region for Propulsion Systems,” Journal of Electrical Engineering Institution of Engineers (India) Series–B: Springer, pp.1-8, November 2016.

28] Praveen O, Dr. Nisha G K, “Analysis of Neutral Clamped Multilevel Inverter With and Without Filter Using Three Level Space Vector Pulse Width Modulation”, in the proceedings of IEEE Sponsered International Conference on Engineering and Technology, pp.  277-283, 16-17 December 2016.

29] Praveen O, Dr. Nisha G. K., “Open Loop Control of NPC Multilevel Inverter Using SVPWM Induction Motor Drive for Electric Vehicle Application”, International Journal of Industrial Electronics and Electrical Engineering, Advance Research Journal of Multidisciplinary Discoveries, vol. 10, no. 1, pp.34-38, Feb 2017.

30] Praveen O, Dr. Nisha G K, “Comparative Analysis of Capacitor Clamped Multilevel Inverter With and Without Filter Using Three Level Space Vector Pulse Width Modulation”, in the proceedings of 29th International Conference on Instrumentation, Electrical and Electronics Engineering, vol.3, no.1, April 2017.

31] Praveen O, Dr. Nisha G K, “Capacitor Clamped Multilevel Inverter Using SVM Induction Motor Drive for Electric Vehicle Application”, in the proceedings of International Conference on Applied Science Engineering and Technology (ICASET) May 2017.

32] Praveen O, Dr. Nisha G K, “Open Loop Control of Three Level Space Vector Pulse Width Modulation of Neutral Clamped Multilevel Inverter Fed Induction Motor”, International Journal for Innovative Research in Science & Technology, Volume 3, Issue 11 April 2017.

33] Praveen O, Dr. Nisha G K, presented a paper on “Direct Torque Control of Induction Motor Using Three Level Space Vector Modulation for Electric Vehicle Application” at  CET Trivandrum for Present Around the World, IET event conducted  on March as part of Drishti 17.

34] Praveen O, Dr. Nisha G K, presented paper on “Direct  Torque  Control  of  Space Vector  Modulated  Neutral  Point Clamped  Three  Level  Inverter  Fed Induction  Machine  for  Fuel Cell Powered  Electric  Vehicle  Applications” in NIT Calicut for MTECH COLLOQUIUM  event conducted  on 24th 26th May 2017.

35] Praveen O, Dr. Nisha G K, “SVM DTC Scheme for Multilevel Inverter fed Induction Motor Drive”, International Journal of Electronics, Electrical and Computational System IJEECS, ISSN 2348-117X, vol. 6, Issue 8, August 2017.

36] Praveen O, Dr. Nisha G. K., “Analysis of DTC-SVM Neutral Clamped Multilevel Inverter Fed Induction Motor for Water Pumping Application”, in the proceedings of 4th International Conference on New Frontiers of Engineering, Science, Management and Humanities (ICNFESMH-2017), ISSN 2348-117X, vol. 6, Issue 8, August 2017.

37] Arya S, Dr. Nisha G K, “Direct Space Vector Modulated Matrix Converter”, in the proceedings of 4th International Conference on Energy Efficient Technologies for Sustainability–ICEETS’18, April, 2018.

38] Arya S, Dr. Nisha G K, “Direct Torque Control of Matrix Converter Fed PMSM”, in the proceedings of IEEE International Conference on Trends in Electronics and Informatics 2018- ICOEI, May, 2018.

39] Arya S, Dr. Nisha G K, “Indirect Space Vector Modulated Matrix Converter”, International Journal of Power Systems and Power Electronics- ICRAET-2k18, Vol. 1 No. 1 May, 2018.

40] Arya S, Dr. Nisha G K, “Indirect Space Vector Modulation Based Three Phase Matrix Converter”, in the proceedings of IEEE International Conference on Control, Communication and Computing-IC4-2018, July 05 – 07, 2018.

41] Arya S, Dr. Nisha G K, “Open Loop Control of Matrix Converter fed Permanent Magnet Synchronous Motor”, in the proceedings of IEEE International Conference on New Trends In Engineering And Technology – ICNTET Sept, 2018.

42] Arya S, Dr. Nisha G K, “Direct and Indirect Space Vector Modulated Matrix Converter”, in  the proceedings of IEEE 4th International Conference for Convergence in Technology (12CT), Oct. 2018 (accepted).

43]Akhilraj, Nisha G K, “Arduino Based PWM Output Voltage Control of a DC -DC Boost Converter for Fan Load”, International Journal of Research in Electronics and Computer Engineering (IJRECE), Vol. 6, No.3, Sept.2018.

44] Akhilraj R. and Dr. G. K. Nisha, “Analysis on speed control of brushless dc motor”, PARIPEX – Indian Journal of Research, Vol. 8, Issue-4, pp: 99 – 101, April-2019.

45] Varsha M. and Dr. G. K. Nisha presented a paper titled “Book picking robot for Library Assistance” at the International Conference on Electrical Engineering and Control Technologies (ICEECT) held at Trivandrum on 19 June 2019.

46] Merin Zachariah, Nisha G. K. and Jeneena Babu, “Circulating Current Control of Parallel connected converters”, IEEE 4th International Conference on Inventive Systems and Control, ICISC 2020, organized by JCT College of Engineering and Technology, Coimbatore, 8-10 January 2020.

Google Scholar Citation: Citation index: 112            H-index: 7              i10 index: 3

Scopus: Author ID: 55321341900    Citation index: 16         H-index: 2

Administrative duties:

  • Assistant Head of the Department (2017 January onwards)
  • Assistant Camp Officer – KTU Valuation camp (2017 December onwards)
  • KTU- Internal Audit Department Coordinator (2015 onwards)
  • Class/Course Committee Chairman(2015 onwards)
  • Member of Strategic Plan Committee (Department Level)
  • Committee Member- NBA (Criteria II),
  • S6- Comprehensive Viva Chair Person (2018)
  • EXODOS 2018- Co-coordinator -Invitation Committee
  • M Tech – Course Coordinator – PCD (2017 onwards)
  • KTU S3 – valuation camp- Chair Person (2017)
  • Tutorial and Session Management Committee- Main Coordinator (IEEE International Conference PEDES 2016 (14th to 17th December 2016)
  • Main Coordinator EXODOS 2016
  • KSCSTE Sponsored STTP Main Coordinator – “Machine Modelling and Application of Power electronics to Renewable energy system” MAPRES’15 (7th to 11th December 2015)
  • IEDC – Nodal officer (2014- 2016)
  • GREENROOM, Kerala’s biggest STARTUP-SME Conclave-Food Committee
  • Session Management Committee- Main Coordinator (IEEE International Conference ICAGE 2014 (17th  to 18th December 2014)
  • CROSSROADS’18 Main Coordinator-Invitation Committee (2018), Program Control Committee- Co Coordinator (2016-2018), Food Committee coordinator (2015)
  • Crossroads Event Coordinator(2014-2018)
  • Main co-ordinator – Tech top 2015
  • Incubation Cell – Inauguration, co-ordinator(2015)
  • Make A Difference (MAD) – In charge
  • Organising Committee Member of STTPs organised by the Department.
  • B.Tech and M.Tech admission duty (2015-2016)
  • M Tech Staff Coordinator (2014-2016)
  • B Tech Staff Advisor (2014 -2018 )
  • Lab in Charge (Electrical Machines Lab)
  • Thesis Co-ordinator M Tech PCD
  • M Tech – PCD Thesis coordinator
  • Time Table Committee coordinator

Scholarship

  • Completed Ph D under SPEED- IT Scholarship Scheme from Kerala IT Mission.

Awards/Recognitions

  • Research Excellence Award in 2018 from Institute for Exploring Advances in Engineering for my research work titled “Torque capability improvement of sensorless FOC induction machine in field weakening region for propulsion purposes” in Elsevier Journal of electrical systems &information technology.
  • IEDC Nodal officer Award in 2016 ((our college has selected one of the first 25 colleges from among 147 colleges)
  • Best Paper Award

International Conference on Advanced Engineering and Technology held at Mysore,  27th  January 2013.

  • Certificate of Merit (Student) Award

2012 IAENG International Multi Conference Engineers and Computer Scientist (Electrical Engineering) held at Hong Kong, 14-16 March 2012.

Reviewer

  • Reviewer of IEEE Transaction on Industrial Electronics
  • Reviewer of Institute of Engineers, IE
  • Physical Science International Journal
  • IEEE International Electric Machines and Drives (IEMDC)
  • Reviewer National Conference NCTT at CET and GEC

Resource Person

  • Rajadhani Institute of Engineering and Technology
  • Mar Baselios College of Engineering and Technology(Plug in Hybrid Electric Vehicle, V2G Technology & Technical Journal Writing)
  • St Xavier’s Catholic College of Engineering (Switched Reluctance Motor Drives)

Professional Membership:

  • IAENG, IET, ISTE, IEEE (Kerala Chapter)
Experience
  • Teaching: 18 years
  • Industry: Nil
  • Research: Nil

Mr. ARUN N

Room No.: E11                  Extn: 213/156

License: Wiring License

Areas of interest: House Wiring

Administrative duties: Sub Station Operator (EMU)

Experience:3 yrs

Training Course Attended: DIALUX Lighting design software

Prof. A. S. Shajilal

Room No.             : B 01       Extn:131
Area of interest
  • Vector control
  • Space Vector PWM
  • BLDC Motor
  • Solar and Wind Energy
Publications
  1. Karthika Nair, Prof. A S Shajilal, “A Comparative Analysis of Cuk and Buck Boost Converter for PFC in an Induction Motor”, International Research Journal of Engineering and Technology (IRJET) Volume 7, Issue 2, February 2020.
  2. Arathy S Nair, Prof. A S Shajilal, “Closed loop control of PV, Wind and the integrated working”, National Conference on Innovative Trends in Renewable Energy Technologies (NCIRET2019), May 2019.
  3. Arathy S Nair, Prof. A S Shajilal, “Developing Electric Vehicle Charging Station from Renewable Energy Sources and Power Delivering Through Smart Grid”, International Conference on Advanced Technologies in Science and Engineering (ICATSE2019), May 2019.
  4. Arathy S Nair, Prof. A S Shajilal,“A smart grid system with Renewable energy sources for isolated operation”, International Multi-Conference on Computing, Communication, Electrical & Nanotechnology (I2CN-2K19), April 2019
  5. Neethu S., Shinoy K. S. and Prof. A. S. Shajilal, “FEA- Aided Design, Optimisation and Development of an Axial Flux Motor for Impalantable Ventricular Assist Device”, International Journal of Electrical and Electronics Engineering, Vol. 5, No. 1, 2011.
  6. Shinoy K.S. and Prof. Shajilal A.S.,”Novel Design, Optimization and Realization of Axial flux motor for Implantable Blood”, in the proceedings of International Conference on Power Electronics, Drives and Energy Systems (PEDES) & 2010 Power India 2010.
  7. Neethu S., Shinoy K. S. and Prof. A. S. Shajilal, in the proceedings of 2011 International Conference on Mechanical and Aerospace Engineering (CMAE 2011), pp 238-242.
  8. Neethu S., Shinoy K. S. and Prof. A. S. Shajilal, “”, in the proceedings of International Conference on Recent Innovations in Technology (ICRIT-2011) R.I.T., Kottayam, Kerala. February 10-12, 2011 pp 204-210.
  9. Betsy Baby, Prof. Shajilal AS, “An Improved Indirect Vector Controlled Current Source Inverter Fed Induction Motor Drive With Rotor Resistance Adaptation”  – in the proceedings of IEEE International Conference on Magnetics, Machines &Drives (ICMMD) – AICERA 2014 held at Amal Jyothi College of Engineering Kanjirappally.
  10. Betsy Baby, Prof. Shajilal AS, “Indirect Vector Control Technique For Current Source Inverter Fed Induction Motor Drive With Improved Decoupling and Field Orientation” – in the proceedings of International Conference On Emerging Trends in Electrical Engineering (ICETREE 2014) held at TKM College of Engineering, Kollam.
  11. Betsy Baby, Prof. Shajilal AS, “Modified Indirect Vector Control Technique For Current Source Inverter Fed Induction Motor Drive With On-Line Rotor Resistane Tuning” – in the proceedings of 15th National Conference on Technological Trends (NCTT 2014) held at College of Engineering Trivandrum.
  12. Rotor Parameter Tuning of Vector Controlled Induction Motor Drive”, in the proceedings of National Conference on Technological Trends (NCTT 2013) held at College of Engineering Trivandrum.
  13. Decoupled P-Q Control of Doubly Fed Induction Generator Based Wind Turbine”, in the proceedings of National Conference on Technological Trends (NCTT 2013) held at College of Engineering Trivandrum.
  14. Vandana P. and Prof. Shajilal A. S., “Modeling and Simulation of Four Quadrant Operation of a Sensorless Brushless DC Motor”, in the proceedings of National Conference on Technological Trends (NCTT 2012) held at College of Engineering Trivandrum.
  15. Veena Wilson and Prof. Shajilal A. S. “Modeling and Simulation of Solar Powered MPPT Based Z-source Inverter Controlled Sensorless BLDC Motor”, in the proceedings of National Conference on Technological Trends (NCTT 2012) held at College of Engineering Trivandrum.
  16. Shahina T. N. and Prof. Shajilal A. S., “Direct Torque Control based Torque ripple minimisation of Brushless DC motor”, in the proceedings of National Conference on Technological Trends (NCTT 2012) held at College of Engineering Trivandrum.
  17. Ms. Shilpa George and Prof. Shajilal A.S., “State of Art of Doubly Fed Induction Generator in a Wind EnergyConversion System,”, International Journal of Advanced Engineering, Management and Science (IJAEMS ),vol. 2, issue 6, pp. 842-845, Jun 2016.
  18. Ms. Shilpa George and Prof. Shajilal A.S., “Wind Turbine-Types of Modelling,” International Journal of Engineering Trends and Technology (IJETT),vol. 38, number 8 , pp. 417-419, Aug 2016.
  19. Ms. Shilpa George and Prof. Shajilal A.S., “Implementation of Average Model of Using Transient Simulation Techniques,” International Journal of Innovative Research and Advanced Studies(IJIRAS),vol. 3, issue 8, pp. 399-401, July 2016.
  20. Ms. Shilpa George and Prof. Shajilal A.S.,“Comparative Study of Average Model of Diode Rectifier with the Model Developed by Modified nodal Analysis Method,” International Journal of Science and Technology, vol. 4, issue 7, pp. 203-208, July 2016.
  21. Ms. Shilpa George and Prof. Shajilal A.S.,“Doubly Fed Induction Generator Modelling Using Forward Euler Method,” International Journal of Scientific Research and Engineering Studies(IJSRES),vol. 3, issue 8, pp. 26-28, Aug 2016
  22. Rudra J Kumar, Prof A.S Shajilal,”Design of PMSG based Wind Energy Conversion System with Unified Power Controller, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering(IJAREEIE),Volume 6,Issue 3.March 2017.
  23. Neena Julian, Prof.A.S.Shajilal, “A Torque Ripple Reduction Method for a BLDC Motor for SPV  fed Water Pumping System Employing Zeta Converter”,  IJAREEIE,Vol no.6,Issue 3,March 2017.
  24. Lekshmy Suresh, Prof. Shajilal A. S., “Space Vector Modulated – Direct Torque Controlled Inverter–Fed Induction Motor Drive” International Journal of Power Systems and Power Electronics, Vol. 1 No. 1 May. 2018.

Administrative duties: 

  • Head of the Department (2017 onwards)
  • PG Coordinator (2014- 2017)
  • PG Professor (from 2017 onwards)
  • Disciplinary Action Committee Chairman
  • Research Promotion Committee Member
  • Class/Course Committee Chairman
  • Appointment and Promotion Committee Member

Professional Membership:

  • ISTE
Experience
  • Teaching: 34 years
  • Research: Nil
  • Industry: Nil

Ms. Elizabeth Varghese

Areas of interest

  •  Aerospace Systems
  • Fractional Controllers
  • Robust Control
  • Adaptive Control

Publications

Journals

  1. Arya S J, Asish A, Febi Shine B S, J L Sreelakshmi, Elizabeth Varghese presented their paper titled   “SKIN DETECTION USING YCbCr COLOUR SPACE FOR UAV BASED DISASTER MANAGEMENT” based on their final year project work in the  8th International Conference on Innovations in Computer Science & Engineering (ICICSE 2020) in virtual mode organized by Guru Nanak University, Hyderabad. The conference proceedings will be published by Springer LNNS series publication.
  2. “Comparative Study of Attitude Control for Rigid Body of Launch Vehicle Using Sliding Mode Control for Different Constant Rate Reaching Laws” Amala Justin, Elizabeth Varghese,International Journal of Innovative Research in Science, Engineering and Technology, Vol. 7, Issue 5, May 2018
  3. “Stabilization of Rotary Arm Inverted Pendulum using State Feedback Techniques” Ms. Elizabeth Varghese and Mr. Jithin Babu,International Journal of Engineering Research & Technology, ISSN-2278-0181, Vol. 4, Issue 7, July 2015.
  4. “Design of Controllers for Liquid Level Control”, Ms. Elizabeth Varghese and Mr. Augustin, International Journal of Electrical Engineering and Technology, Vol. 6, Issue 7, July 2015.
  5. “Fractional Order PID Controller for Liquid Level System “Ms. Elizabeth Varghese and Mr. Ramkumar V P, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 4 Issue 07, July-2015
  6. “Space vector PWM based two level inverter topology for Wind energy conversion systems”, Mr. Aneesh Kumar K T, Ms. B Prasannakumari, Ms. Elizabeth Varghese,International Journal on Advanced Electrical and Computer Engineering, IJAECE, Volume_1, Issue_1, 2014, pp 28-34.

Conferences

1.“Fractional stabilizing controller for a magnetic levitation system”, G. Dhanya, Elizabeth Varghese, International Conference on Circuit,Power and Computing Technologies (ICCPCT)2017, pp : 1 – 8

2.“Design and simulation of robust filter for tracking control of quadcopter system”, Shincy Gilbert; Elizabeth Varghese International Conference on Circuit, Power and Computing Technologies (ICCPCT), 2017

3.“Comparison of Performance Indices of PID Controller with Different Tuning Methods”,  Anagha Philip Antony and Elizabeth Varghese, IEEE International conference on Power and Computing Technologies Circuit, 2016

4.“Simulation topology and control methods for Wind energy conversion systems” , Mr. Aneesh Kumar K T, Ms. B Prasannakumari, Ms. Elizabeth Varghese, International Conference on Emerging Trends in Electrical Engineering ICETREE_2014.

5.“Space vector PWM and fractional controller based Wind Energy Conversion systems”, Mr. Aneesh Kumar K T, Ms. B Prasannakumari, Ms. Elizabeth Varghese ,Dec 17-18,2014, International Conference on Advances in Green Energy(ICAGE),Pages 74-81, IEEE Conference Publications2014

6.“Fractional Order PI Controller to Control the Speed of Permanent Magnet Synchronous Motor Drive” , Ms. Tania K.S., Ms. Elizabeth Varghese,  International Conference on Electrical Electronics and Computer Engineering ICEECE 2014.

Administrative duties

Head of the Department                            :    From 01-07-2014 to 08-01-2017

Assistant HOD                                           :    From 16-09-2009 for two years

NBA Coordinator                                      :    From June 2008 to June 2017

Admission Coordinator                              :    From 2008 onwards

Grievance Redressal Committee member  :    From 06-03-2017 onwards

Professional Memberships
IET, ISTE, ISSE
Experience
  • Teaching: 15 years
  • Industry: Nil
  • Research: Nil

Mr. Praveen Raj R. S.

Area of interest
  • Smart Grids
  • Islanding
Publications
  1. Sarika E P, Mr. Praveen Raj R S, “Comparison of direct torque control of two level fed three phase induction motor with conventional sinusoidal pulsewidth modulation scheme”, in the proceedings of International Conference on Current trends in Engineering and Technology (ICCTET), July 2014.
  2.  Mary Suja Antony, Mr. Praveen Raj R S, “Field oriented control of PMSM with carrier based Space Vector Pulse width Modulation technique”, International Journal of Engineering Research and Technology, Aug 2015.
  3. Mary Suja Antony, Mr. Praveen Raj R S, “Four Quadrant operation of Vector Control of PMSM with dynamic Braking”, International Journal of Engineering Research and Technology, Aug 2015.
  4. Mary Suja Antony, Mr. Praveen Raj R S, “Switching Loss Estimation of SiC Mosfet in LT spice”, International Journal of  Electrical and Electronics Engineering, Aug 2015.
  5. Dawn P varughese, Mr. Praveen Raj R S, “Solar powered closed loop SVPWM inverter connected to grid”, International Journal of Science and Innovative Engineering & Technology, May 2017.

Administrative duties

  • M Tech (M4 PCD) Staff co ordinator
  • B- Tech (S6 EE1) Staff Advisor
  • Kerala University Exam Chief Supdt. (2016 to till date)
  • Asst. HoD (EE- 2011 to 2013)
  • NBA Acreditation Criteria Co-ordinator (Criteria 10) – 2018 onwards
  • NBA Acreditation Criteria Co-ordinator (Criteria 8) – till 2018
  • Crossroads Technical Event co-ordinator 2016
  • Cross roads Light and Sound co-ordinator
  • Cross roads Publicity Co-ordinator 2018
Professional Memberships
  • LMISTE
Experience
  • Teaching: 15 Years
  • Industry: Nil
  • Research: Nil

Ms. Sheenu P.

Room No.       : B 09  Extn:134
Area of interest
  • Signal Processing
  • Digital Electronics
  • Microprocessors & Microcontrollers
Publications
  1. Ms. Sheenu P, Dr. M J S Rangachar, “ Modelling & analysis of LF scatter from the sea using surface wave radars for tsunami signal detection” , International Journal of Electronics & Communication Engineering(IJECE), ISSN:2278-991X; vol.7,Issue 4, Jun-July 2018.
  2. AkashSasidharan, Ms.Sheenu P.,”Modelling and Control System Design of Launch Vehicle”, in the proceedings of International Conference on Energy Efficient Technologies for Sustainability (ICEETS) 2018.
  3. AkashSasidharan, Ms.Sheenu P, ”Dynamic modelling and control system design for Ascent Phase of Launch Vehicle”, in the proceedings of 3rd National conference on Future Technologies in Power, Control & Communication systems (NFTPCOS ’18).
  4. AkashSasidharan, Ms.Sheenu P., Analysis and Design of a Typical Launch Vehhicle”, in the proceedings of International Conference on Technology Innovation in Mechatronics, Energy Management and Intelligent Communication (ICTIMEMIC’18).
  5. Kannan P S, Ms.Sheenu P, “PID Control of Twin Rotor Mimo System”, International Journal of Advanced Research In Basic Engineering Sciences And Technology, IJARBEST, Volume 2, Special Issue 23, April 2017.
  6. Kannan P S,Ms.Sheenu P, “Advanced Control of Twin Rotor Mimo System”, International Journal of Advanced Research Trends In Engineering And Technology, IJARTET, Volume 4, Special Issue 6, April 2017.
  7. Athul G Nathan, Ms.Sheenu P,” Torque Ripple Reduction In Induction Motor Using PWM Techniques”, International Journal Of Advanced Research In Electrical, Electronics And Instrumentation Engineering, IJAREEIE, Volume 6, Issue 4, April 2017.
  8. umana Beegum N S, Ms. Sheenu P, “Comparison of Speed Control of PMSM Using PI, PID& Adaptive PIDControllers”, International Research Journal of Engineering and Technology (IRJET), Vol.3, Issue. 06, June 2016.
  9. Jumana Beegum N S, Ms. Sheenu P,” Speed Control of PMSM with Different Control Methods”, International Journal of Electrical and Electronics (SSRG-IJEEE), Vol.3, Issue. 06, June 2016.
  10.  Vijisha V U, Ms. Sheenu P, “Design and Modeling of Generalized Photovoltaic System with a Half- Bridge Converter”, IJSRD, Vol.4, Issue 4,pp.932-935,2016.
  11. Ms.Sheenu P, Dr. M J S Rangachar , “Design of Surface wave radars for Tsunami predictions”, in the proceedings of National Conference on Emerging Trends in Engineering & Technology/ International Advanced Research Journal in Science, Engineering & Technology(IARJSET) titled, volume 3, special issue 3,August 2016.
  12. Anjali R D, Ms. Sheenu P, “Voltage Regulated Five Level Inverter Fed Wind Energy Conversion System using PMSG”, International Journal of Engineering Research & Technology (IJERT), Vol. 04, Issue 08, August 2015, pp: 618 – 622.
  13. Anjali R D, Ms. Sheenu P, “Comparison of Wind Turbine Driven PMSG Fed Wind Energy Conversion Systems using Reactive Power Controlled Two Level Inverter”, International Journal of Engineering Research and General Science, Vol. 03, Issue 05, Sept.-Oct. 2015, pp: 440 – 448.
  14. Anjali R D, Ms. Sheenu P, “Modelling and Performance Analysis of Reactive Power Controlled Wind Energy Conversion System”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol. 04, Issue 10, October 2015, pp: 8166 – 8173.
  15. Ms. Sheenu P, Dr. M J S Rangachar ,” Advance prediction of Tsunami by Surface Wave radars” , International Journal of Advanced Research Trends in Engineering & Technology (IJARTET), March 2015
  16. Ms. Sheenu P, Dr. M J S Rangachar, “Advance Prediction of Tsunami by Radio Methods”, International Journal of Innovations in Engineering & Technology (IJIET), February 2015.

Administrative duties

  • Assistant HoD (2015-17)
  • Department Staff Co-ordinator (2014-16)
  • Staff Co-ordinator (2006-10 batch)
  • STTP on PESA Co-ordinator (2011)
  • Reception Committee (IEEE international Conference PEDES 2016)
  • NBA Criteria 123 Co-ordinator (till 2018)
  • NBA Department coordinator (2018 onwards)
  • Staff coordinator (2015-19 batch)
  • Seminar coordinator (2015-19 batch)
  • Lab-in-charge (DC and Embedded Systems Lab)
  • Lecture series (Impulse) coordinator
  • Member of Strategic Plan Committee (Department Level)
  • IET Nexus 2019 National seminar in charge
Professional Memberships
  • ISTE, IET
Experience
  • Teaching: 13 years
  • Industry: 1 year
  • Research: Nil

Mr. F. R. Rejish Babu

Room No              :  B 310     Extn: 107

Area of interest
  • Power System Analysis
  • Electrical System Design
  • Electrical Machines
Publications
  1. Mr. F R Rejish Babu and Ancy A George, “Analysis & Simulation of PI and Fuzzy Controlled Multilevel Inverters fed BLDCM with Position Feedback”, in the proceedings of 2nd International Conference on Current Trends in Engineering & Technology(ICCTET 2014),pp 321-326.
  2. Mr. F R Rejish Babu and Sreeja Jeyadevan, “A Grid Connected Photovoltaic Micro-inverter System with a Plug-in Repetitive Current Controller”, IEEE IJSTE, International journal for science and technology 2015.
  3. Dr. Nisha G K, Priji P.J, Mr. Rejish Babu, “State of the art of three phase  to three phase matrix converter for motor drive”, International Journal for scientific research and development,  vol. 4, no. 4, pp. 677-68,August 2016.

Administrative duties:

  • Staff Advisor (B. Tech 2018 – 22 Batch)
  • Staff Club 2008-2009 President
  • Senate Staff Advisor(2010 -2012)
  • NBA Accreditation Criteria Co-ordinator
  • ICAGE 2015 International Conference Committee Member
  • PEDES 2016 International Conference Committee Member
  • CROSSROADS Main Committee(2013-2018)
  • Exam Cell Department Representative(2010-2012)
  • Crossroads Event Coordinator(2013-2018)
  • Faculty in Charge(Electrical Maintenance Unit, MBCET)
Professional Memberships
  • ISTE
Experience
  • Teaching: 10 Years 4 Months
  • Industry: Nil
  • Research: Nil

Ms. P. Sandhya

Room No.             :  B 0A                  Ext: 130

Area of interest
  • Power Electronics & Drives
  • Renewable
Publications
  1. Mr. Midhun G, Ms. Sandhya P, “A Dual Two-Level Inverter Fed Open-End Winding Scheme with Space Vector PWM”, IJAREEIE, Volume. 4, Issue. 10, October – 2015.
  2. Mr. Midhun G, Ms. Sandhya P, “Circulating Common-Mode Current Reduction In Openend Winding Induction Motor”, in the proceedings of International Conference on Industrial Electronics and Electrical Engineering (ICIEEE) ISSN: 2347-6982  Volume-3, Issue-11, November-2015.
  3. Mr. Midhun G, Ms. Sandhya P, “Comparison Study for SVPWM based CMV Elimination between Two- Level Inverter, Three-Level NPC Inverter and Dual Two-Level Inverter fed Induction Motor” ,International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 4 Issue 08, August-2015.
  4. Mr. Midhun G, Ms. Sandhya P, “SVPWM Based Common Mode Voltage Mitigation using Boost Converter fed Open-End Winding AC Drive”, in proceedings of International Conference on Control, Communication & Computing India, Nov 2015.
  5. Mr. Midhun G, Ms. Sandhya P,”Hardware Implementation Of A Dual Two-Level Inverter With Svpwm Using Pic Microcontroller,” Journal of Research in Engineering and Applied Sciences, Vol. 1, Issue 04, rivOct. 2016.
  6.  Ms. Shilpa Susan Peter, Ms. Sandhya P,“Comparative Study of PV Fed Induction Motor Performance with SPWM and SVPWM”, International Journal for Scientific Research & Development, Vol. 4, Issue 04,June 2016.
  7. Ms. Shilpa Susan Peter, Ms. Sandhya P, “Direct Torque Control of Induction Machine Using a Simplified Switching Scheme with Flux Optimization”, JECET, Sec. C; Vol.5. No.3, 251-261, June 2016.
  8. Ms. Shilpa Susan Peter, Ms. Sandhya P,”Comparison of Classical DTC Scheme and a Simplified DTC Scheme with Flux Optimization for an Induction Motor Drive’’, International Research Journal of Engineering and Technology, Volume: 03 Issue: 07 | July-2016.
  9. AsnaShanavasShamsudeen, Ms. Sandhya. P., “Common Mode Voltage Reduction in a Three Level Neutral Point Clamped Inverter Using Modified SVPWM”, International Journal of Innovative Research in Science, Engineering and Technology, 4, 3410-3415.
  10. AsnaShanavasShamsudeen, Ms. Sandhya. P., “Space Vector PWM for Three Level Neutral Point Clamped Inverter”, International Journal of Innovative Research Explorer, 4, 314-319.
  11. Ms. Sandhya. P, AsnaShanavasShamsudeen, “Comparison of 3 Level and 5 Level NPC Inverter using SPWM”, International Journal of Science and Research, Volume 7 Issue 6, June 2018
  12. Lekshmi Devi, Sandhya P., “Comparative Study of SPWM And SVPWM of Solar Fed Induction Motor Using Push Pull Converter”, International Multi-Conference On Computing, Communication, Electrical & Nanotechnology (I2CN-2K19), April 2019.
  13. Lekshmi Devi, Sandhya P., “Comparative Study Of SPWM And SVPWM Of Solar Fed Induction Motor Using Boost Converter”, International Conference on Advanced Technologies in Science and Engineering (ICATSE2019), May 2019.
  14. Rinki Roy Chowdhury, Sandhya P., “Arduino Uno Controlled DC Weaving Machine powered by Solar Energy”, International Research Journal of Engineering and Technology, Volume: 07, Issue: 01, Jan 2020, pp: 1 – 9.

Administrative duties

  • Staff coordinator of EE department from 2011- 2013.
  • Staff Advisor of B.Tech 2012 batch.
  • Member of the Organizing committee of National conference on Applied Linear Algebra and transform techniques, July 2012.
  • Member of the Organizing committee of the International Conference on “Green Technologies”, MBCET, December 2012.
  • Co­ordinator of ISTE STTP on “Power Electronics and drives ­ Technology, Advances, Trends and applications 2013.
  • Organizing member, International Conference on “Advances in Green Energy”, MBCET December 2014.
  • Assistant HOD, Electrical & Electronics Dept., MBCET from 01-08-2013 to 31-07-2015.
  • Staff Advisor of M.Tech PCD 2013-2015 batch.
  • Thesis Co-ordinator of M.Tech PCD 2015batch.
  • B.Tech and M.Tech admission duty 2015,2016,2017,2018.
  • Co-coordinator of reception committee of crossroads 2016.
  • Criteria Coordinator of NBA.
  • Coordinator of certificate committeeParados2016.
  • Organizing member, 2016 IEEE International Conference on “Power Electronics, Drives and Energy Systems”, IEEE PEDES 2016.
  • Staff Advisor of M.Tech PCD 2016-2018 batch.
  • Staff Advisor of Btech2015-2019 batch.
  • Lab in Charge of Power Electronics & Drives lab.
Professional Memberships
  • Life Membership ISTE
Experience
  • Teaching: 13 years
  • Industry: Nil
  • Research: Nil