Home > Mechanical Engineering > Dr. Deepak G Dilip

Dr. Deepak G Dilip

Assistant Professor

Employee Code / ID No. 10612033
Qualifications M.Tech., PhD.
Orcid ID 0000-0002-3896-031X
Industry / R & D Experience NIL
Email ID [email protected]
Alternate E-mail ID [email protected]
Mobile No (Optional) / Intercom Extension No.  —
Areas of Interest / Current Research Sustainable manufacturing, Smart manufacturing, Non conventional machining, MEMS.
Research,  Consultancy, Publication Google scholar: https://scholar.google.com/citations?user=8aCKbboAAAAJ&hl=en
International Journal
1. Deepak G Dilip, George John, Satyananda Panda and Jose Mathew, 2020, “Finite-volume-based conservative numerical scheme in cylindrical coordinate system to predict material removal during micro-EDM on Inconel 718”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 90 https://doi.org/10.1007/s40430-019-2161-5.
2. Deepak G Dilip, Satyananda Panda and Jose Mathew, 2020, “Characterization and Parametric Optimization of Micro-hole Surfaces in Micro-EDM Drilling on Inconel 718 Superalloy Using Genetic Algorithm”, Arabian Journal for Science and Engineering, https://doi.org/10.1007/s13369-019-04325-4.
3. Deepak G Dilip, Ananthan S P, Satyananda Panda and Jose Mathew, 2019 “Numerical Simulation of the Influence of Fluid Motion in Mushy Zone during Micro – EDM on the Crater Surface Profile of Inconel 718 Alloy”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41: 107. https://doi.org/10.1007/s40430-019-1595-0.
Book Chapters
1. Deepak G Dilip, Jose Mathew, 2022, “Hybrid Micro-EDM” In: Kuriachen, B., Mathew, J., & Dixit, U.S. (Eds.). Electric Discharge Hybrid-Machining Processes: Fundamentals and Applications (1st ed.). CRC Press., pp.283 – 304. https://doi.org/10.1201/9781003202301.
2. Nithin Allwayin, Deepak G Dilip, Satyananda Panda and Jose Mathew, 2020, “Real-Time Numerical Scheme for Crater Geometry Simulation in Micro-EDM Process” In: Bhattacharyya S, Kumar J, Ghoshal K (eds) Mathematical Modeling and Computational Tools. Springer Proceedings in Mathematics and Statistics, Springer, pp 265-281.
3. Deepak G Dilip, Satyananda Panda and Jose Mathew, 2020, “Evaluation of Side Wall Roughness and Material Removal Rate in Vibration Assisted Powder Mixed Micro-EDM Drilling on Inconel 718” In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, pp. 381-389.
International and National Conference
1. Adithyan, S., Nithul, P., Sooraj, S. S., Bharath, K. R., Dilip, D. G., and Gilbert, E. G., 2021, “Design and Analysis Floating Wheel Chair,” Proceedings of Third International Conference on Computing in Mechanical Engineering, SCMS College of Engineering, Kerala, September 22 – 24, 2021. pp. 54 – 55.
2. Dilip, D. G., George, J., Panda, S., Manu, R., and Mathew, J., 2019, “Roundness and Tool wear rate investigations during Micro-EDM drilling of Inconel 718,” Proceedings of 11th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-11, 2019), IIT Indore, Dec 12 – 14, 2019.
3. Nidhi M. B and Dilip D. G., 2019, “Role of Socially relevant research projects in Engineering Education” Souvenir of 30th Annual state faculty convention of ISTE Kerala section and National Seminar, J.D.T Polytechnic College Kozhikode, Dec 7, pp. 127 – 132.
4. Ananthan, S. P., Dilip, D. G., Panda, S., and Mathew, J., 2017, “Numerical Simulation and Experimental Investigation of the Crater Surface Profile Formed During Micro EDM on Inconel 718,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras, Dec 6-9. pp. 243 – 246.
5. Dilip, D. G., Nitinraj, M., Panda, S., and Mathew, J., 2017, “Effect of SiC particles in dielectric on geometrical and surface characteristics during micro-EDM drilling,” Proceeding of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras, Dec 6-9. pp.247-250.
6. Dilip, D. G., John, G., Panda, S., and Mathew, J., 2016, ” Numerical Modeling Of Micro-EDM Process Using Finite Volume Method,” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR 2016), College of Engineering Pune, pp.1556-1560.
7. Dilip, D. G., Subrahmanyam,A., Kuriachen, B., Panda, S., and Mathew, J., 2016, ” Experimental Investigations on HAZ and Recast Layer in WEDM on Inconel 718,” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR 2016), College of Engineering Pune, pp. 458-462.
8. Nitinraj, M., Dilip, D. G., Panda, S., and Mathew, J., 2016, ” Experimental Studies on Effect of Powder Mixed Dielectric on Surface Quality in Wire EDM,” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR 2016), College of Engineering Pune, pp.463-467.
9. Dilip, D. G., John, G., Panda, S., and Mathew, J., 2015, “Numerical Modeling and Multi-Objective Optimization of Process Parameters in Micro-EDM Drilling on Inconel-718,” Proceedings of 9th International Conference on Precision Meso Micro and Nano Engineering-COPEN 9, held during Dec 10-12, 2015 at IIT Bombay.
10. Subrahmanyam A, Nithinraj M., Dilip, D. G, Jose Mathew, 2015 “Electro-Thermal Modeling of Temperature Distribution in Tool Electrode during Micro EDM”, Proceedings of 9th International Conference on Precision Meso Micro and Nano Engineering-COPEN 9, held during Dec 10-12, 2015 at IIT Bombay.
11. Dinesh Babu P., Dilip, D. G, Somashekhar K.P, Allesu K., J. Mathew.,2014, “Numerical Modeling and Multi-Objective Optimization of Micro-Wire EDM Process” Proceedings of 5th International & 26th All India Manufacturing Technology, Design and Research conference (AIMTDR 2014), IIT Guwahati., vol 1,332:1-6.
12. Dilip, D. G, Basil Kuriachen and Jose Mathew, 2013 “Finite Element Analysis of Temperature Distribution on Various Workpiece Materials Machined using μ-EDM”, Proceedings of 8th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, NIT Calicut, vol. 1, pp. 251-256.
13. Dilip, D. G, Basil Kuriachen and Jose Mathew, 2012 “Multi-objective Optimization of Process Parameters in Vibration Assisted Micro-EDM”, Proceedings of 4th International & 25th All India Manufacturing Technology, Design and Research conference (AIMTDR 2012), Dec. 2012, Jadavpur University Kolkata, Vol. 1, pp. 1025.
14. Jose Mathew, Dilip, D. G, Mathew J. Joseph, Basil Kuriachen, 2012 “Finite element modeling of discharge zone in micro-EDM process”, ASME (2012), International Mechanical Engineering Congress and Exposition, Houston Texas USA, Vol. 3, Part B, pp. 1047-1052.
15. Kuriachen Basil, Dilip, D. G, M.S. Navaneeth and Jose Mathew, 2012 “MRR Optimization of Inconel 718 in Low Frequency Work Piece Vibration Assisted Micro-EDM using RSM”, Proceedings of 4th International & 25th All India Manufacturing Technology, Design and Research conference (AIMTDR 2012), Dec. 2012, Jadavpur University Kolkata, Vol. 1, pp.1085 – 1089.
16. Dilip, D. G, Jose Mathew, 2011 “Experimental Investigation and Optimization of Process Parameters in Micro Drilling using Vibration Assisted Micro EDM”, Proceedings of 7th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), College of Engineering Pune ,Dec. 2011, pp. 174-177.
Ph.D Research Guidance ( Research Scholar, E-mail ID, Research Topic/ Tentative Thesis Tittle) Nil
Academic / Professional Outreach Activities Chief Time Table coordinator, Mar Baselios College of Engineering and Technology since October 2020.
ISTE Student chapter faculty advisor since September 2021.
Stream coordinator – Production.
Reviewer of Journal of the Brazilian Society of Mechanical Sciences and Engineering.
Reviewer of Arabian Journal of Science and Engineering.
Reviewer of Transaction of the Indian Institute of Metals.
Reviewer of Materials Today Proceedings.
Served as chair at Triboindia 2021, 02-04 December 2021.
Reviewer ot Triboindia 2021.
Membership in Professional bodies/ organizations ISTE Life Member
Community Outreach Activities  —
Awards / Distinctions / Rank / Other Achievements if any Winner of 2012 ISTE G.S.F.C. National Award for Best M.Tech. Thesis in Mechanical Engineering for the thesis titled : Multi-Objective Optimization of Process Parameters in Micro Drilling using Vibration Assisted Micro EDM.
First rank holder and Gold Medalist for securing highest CGPA in M-Tech Manufacuring Technology, NIT Calicut (2010-2012).
Selected for ONGC Scholarship (2011-2012) in M-Tech mechanical at NIT Calicut for securing the highest CGPA in M-Tech Mechanical Engineering for the year 2010-11.